Initiative

Bien acheter son combustible bois

Valbiom
CategoriesWebsite CountriesBelgium

You heat with wood via a stove (woods or pellets) or a biomass boiler (woods, pellets, wafers)? Congratulations, you already benefit from an ecological green heat and you use a fuel of the most economical. But to make the most of your device, it's important to use quality fuel. Here are our tips for a wise and responsible purchase of your fuel!

 

Logs: Focus on the local and well-dried logs

Heating up with logs has an undeniable charm. Still, you have to use dry logs to make the most of your device. In fact, a wood that is too wet consumes some of the heat to first dry in the combustion chamber (less heat for you) and decreases the quality of combustion (meaning polluting combustion). So be sure to buy your logs properly dried or dry them yourself under ventilated shelter if you buy them "fresh" or produce them yourself. In our latitudes, it takes 18 to 24 months to dry logs from freshly felled wood. The goal is to achieve a humidity level of less than 20%.

Pellets: Only use certified pellets

There is still a great deal of price variability in the wood pellet market, due in part to different quality and provenance. Between good deals and scams, the limit is sometimes difficult for the consumer to pin down. Certification ensures that pellets meet the specifications of this standard, but also that production is carried out in a process controlled and validated by an independent body. In Belgium, two certification systems are currently in use: "DINplus" and "ENplus". To ensure that you have to make a certified pellet, the bag must have the official logo of the relevant certification, which is accompanied by the certification number of the producer or dealers (Reg type 7Ax for DINplus or BE xxx for ENplus). If you buy pellets in bulk (for boilers), the seller must be able to provide you with the certificate

Platelets: give yourself the means to check the quality

The wafer is low in energy, its transport quickly becomes very expensive. That's why the vast majority of platelet suppliers will offer locally produced wafers, a guarantee of a short-circuit fuel.

While wafers are undoubtedly the cheapest wood fuel,there is unfortunately no certification used on a large scale in Wallonia to guarantee the buyer quality. The EN certification bodyin addition to pellets has launched a certification for wafers, called GoodChips,but it is still struggling to expand in this market.

Vous vous chauffez au bois via un poêle (bûches ou pellets) ou une chaudière biomasse (bûches, pellets, plaquettes) ? Félicitations, vous bénéficiez déjà d’une chaleur verte écologique et vous utilisez un combustible des plus économiques. Mais, pour profiter au mieux de votre appareil, il est important d’utiliser un combustible de qualité. Voici nos conseils pour un achat judicieux et responsable de votre combustible !

Bûches : privilégiez le local et les bûches bien séchées

Se chauffer aux bûches présente un charme indéniable. Encore faut-il utiliser des bûches bien sèches pour profiter au mieux de son appareil. En effet, un bois trop humide consomme une partie de la chaleur pour d’abord sécher dans la chambre de combustion (moins de chaleur pour vous) et diminue la qualité de la combustion (ce qui signifie une combustion polluante). Veillez donc à acheter vos bûches correctement séchées ou à bien les faire sécher vous-même sous abri ventilé si vous les achetez « fraîches » ou les produisez vous-même. Sous nos latitudes, le séchage de bûches provenant de bois fraichement abattu prend de 18 à 24 mois. L’objectif est d’arriver à un taux d’humidité inférieur à 20 %.

Pellets : n’utilisez que des pellets certifiés

Il existe encore une grande variabilité de prix sur le marché des pellets (ou granulés) de bois, liée en partie à une qualité et des provenances diverses. Entre bonnes affaires et arnaques, la limite est parfois difficile à cerner pour le consommateur. En Belgique, deux systèmes de certification sont actuellement utilisés : « DINplus » et « ENplus ». Pour s’assurer d’avoir à faire à un pellet certifié, le sac doit être munis du logo officiel de la certification concernée, lequel est accompagné du numéro de certification du producteur ou revendeurs (de type Reg n° 7Axxx pour DINplus ou BE xxx pour ENplus).

Plaquettes : se donner les moyens de vérifier la qualité

La plaquette étant peu dense énergétiquement, son transport devient vite très couteux. C’est pourquoi la grande majorité des fournisseurs de plaquettes vous proposeront des plaquettes produites localement, gage d’un combustible produit en circuit court. Si la plaquette est sans contestele combustible bois le moins cher, il n’existe hélas pas encore de certification utilisée à grande échelle en Wallonie pour garantir à l’acheteur la qualité. L’organisme chargé de la certification ENplus des pellets a lancé une certification destinée aux plaquettes, dénommée GoodChips, mais celle-ci peine encore à prendre de l’ampleur sur ce marché.

View website See the video
Contact Information
Pierre-Louis Bombeck